Installing a new program in your Prime Equipment Group machine’s Schneider unit is simple, using these step-by-step instructions
If you have not done so already, download the Schneider HMI panel program for your machine by selecting the proper file here. Save it to a USB drive, and take that drive with you to the machine. Then:
1. Insert the USB Flash Drive containing the program files into the USB slot on the bottom of the Schneider unit, inside the box, as below.
![Schneider Unit USB](https://www.jbtc.com/foodtech/wp-content/uploads/sites/2/2021/08/Schneider-Unit-USB.jpeg)
2. You will be asked “Do you want to install a new project from the USB drive.” Tap “Yes” as below.
![Schneider Yes](https://www.jbtc.com/foodtech/wp-content/uploads/sites/2/2021/08/Schneider-Yes.jpeg)
3. After the program is loaded, you will see the screen below. Remove the USB drive, and press “Restart.”
![Schneider Restart](https://www.jbtc.com/foodtech/wp-content/uploads/sites/2/2021/08/Schneider-Restart.jpeg)
CONTACT US
We’re here to help every step of the way.